When this is complete, wipe the excess ink and check the result. That is why this stage is the most painful.
#Tattoo tutorial for beginners skin#
Shading is the most serious part of tattooing because it damages the skin more than the contour. When you do the shading of the design, the movements of your hand should be stable. A “sweep” involves penetrating the needle in and out. You can also use the “reamer” technique, which is suitable for black and color inks. Drive the needle in a circular motion and do not overload it. The beginning of the shading lies in a darker part. Go to the next stage and shadow the tattoo!
Use other Techniquesĭid you make a line of overlap and had time to rest? A small needle will be more intense shading. Therefore, if the overlapping line is small, a small needle is enough.Ĭhoose the needle also based on the intensity of the color that you plan to obscure.
The main thing is to follow the rule “most of it is a big needle”. The overlapping line should be neat, so you can select the shader needle for this task.īut the choice of needle depends on the particular tattoo you are drawing. Take the ink and make sure there are no gaps in the design. When the outer and inner border of the tattoo is ready, it’s time to cut both lines. So, you give a rest to you, your hands and the client from the pain. It is reasonable to make such breaks after completing each task. Because I want to be sure that I do not need to fix anything, and I can start the next stage of tattooing. I use this time to check the line that I got. Take a break, eat TWIX! Better let your hands rest.Ī short break between setting the outline and darkening represents an important time of rest and new preparation. To do this, make lines with a weak color.Īt this stage, you should remember that you cannot press hard unless you get uneven lines and this will make healing difficult. Your hand should perform long smooth movements (holding a tattoo machine). Make a line and be sure that when you draw a path you did not create any problems. Put the mark and lead the needle up (it’s better to start the line from the middle). Do not fill the needle to the brim because ink can spill. Mind that the machine should not be turned on at this stage!įill in the ink and start to lead the line quickly and easily.
To do it right, you need to lower the tip of the needle into the ink. If you use ink and a needle of one type with a contour, then for the inside you use thick ink and other needles. It means that you create a line that is wider than the first. Proceed to the Inside of the Contourĭrawing a tattoo begins with creating a contour, and then the inner part of the outline. I would recommend making the design scheme beforehand again, but with the help of ink and one needle.Īfter the stencil, you must again clean the client’s skin before starting the basic work – creating a tattoo. After all, the stencil should be placed on the skin of the natural. When you apply the stencil on the skin, keep the skin tightened. Be sure the stencil will save you from mistakes. It will be a very convenient and correct guide to action. Have a Stencil on Handĭid you make a stencil before you started? You will transfer the stencil onto the client’s skin. Keep in mind the taboo on creating cuts and irritations while preparing the skin for tattooing. The tattoo artist should shave the tattoo (in the direction of hair growth) and disinfect the area where he/she plans to draw a tattoo. The client’s skin should be clean as in the operating room. The hygiene of tattooing does not end at the hands of a tattoo artist and the sterilization of equipment. Be Sure of the Skin Purity that You Will Tattoo
Try to make the length of this outlet smaller, since a longer length can damage the skin. The average length of the needle exit should vary from 0.6 to 1 mm. The camp needle should be in the zone of the lager, and the tip of the needle should extend no more than 1 mm from the needle. In addition to hygiene, the tattoo artist should be sure that the needle is firmly installed and the tattoo machine is working. Be Sure That You Have Correctly Installed the Needle It will be better if the sterilization takes place before the client, for him/her to make sure, you respect the hygiene and take care of the health of the client. Before starting the work, the tattoo artist must sterilize the equipment in an autoclave.